Homeowners with central air conditioning systems installed in their homes often have to make major decisions, one of them being whether to repair or replace the HVAC system. While the following tips may not be able to erase all your concerns, they can help you make confident decisions by getting the guesswork out of the way. This guide will help you:
– Reduce operating costs as well as AC installation costs
– Increase home comfort with effective equipment
– AND get guaranteed energy savings from your home’s HVAC system.
These tips will enable you to better understand current trends in air conditioning technology.
Repair or Replace – The Benefits of Updating Your Equipment
TIP! If your only option is to replace your HVAC equipment, make sure you purchase ENERGY STAR compliant equipment. While this may seem like a simple tip, it is not.
As you may already know, electronics, mechanical equipment, and even human beings become less reliable as a result of the effects of aging. It is possible that your old HVAC system may be repairable, but you have to test and see before you can make the decision. Start by getting an estimate for the HVAC repairs. Compare the repair costs versus the replacement cost. You also need to consider factors, such as the age of the existing unit, durability, and system performance. Remember that the more often your HVAC system breaks down, the more you’ll have to revisit the question of repairing versus replacing. If you decide to replace your HVAC equipment after reading this article and determining that your old HVAC system is making it difficult for you to enjoy optimal home comfort and the energy-saving benefits of modern technology, get in touch with a local HVAC company. Ask a local HVAC installation company to create an HVAC replacement package that is within your financial reach. While the cost and quality of the new HVAC equipment are key considerations, be sure to also pay attention to the workmanship guarantees offered by the different contractors. To Make a Wise Replace or Repair Decision for Your HVAC System, you have to review all your options and determine the best course of action by considering all the key factors. Below is a breakdown of the key factors to consider prior to making a decision. They should be applied equally to any make or model of heating and space-cooling equipment. If you have any questions specific to a particular manufacturer, contact your local HVAC Crown Point dealer.
Type of AC Refrigerant Used
R-410A or R-22: These two refrigerants are the most commonly used refrigerants in air conditioning units and residential heat pumps. However, R-22 was banned in 1987 as a result of the Montreal Protocol. Since then, phasing out of R-22 has been enforced through the 1990 Clean Air Amendments Act. This Act enforced the phasing out of R-22 and any other refrigerant that had an adverse effect on the ozone layer and the environment. After the ban, which was fully implemented on January 1, 2020, no manufacturer is allowed to produce R-22. This means that the only available R-22 in the market is either recycled, recovered, or reclaimed R-22. As a result, the cost of recharging an AC unit that uses R-22 has gone up considerably. In fact, the cost is unreasonably high, so it is better to just replace your aged AC unit to avoid these hassles. Take note that the most efficient AC units that run on R-22 can only have a maximum SEER rating of 13, which is mediocre considering the efficiency of new units.
TIP! Consider the Seasonal Energy Efficiency Ratio of a new HVAC system before making a purchase. While the price of a new unit is a key factor of consideration, what matters more is the energy savings you can make in the long run after installing a new unit. This could run into thousands of dollars. Therefore, the efficiency of an HVAC unit is a question that you can’t afford to ignore. SEER was established by the DoE in January 2006. The current lowest SEER rating for HVAC equipment is 13-SEER. A higher SEER rating indicates greater energy efficiency and performance, which is what you are looking for. If you have an aged 10-SEER system, make sure the repair costs are very low. Otherwise, it would be better to install a new and more efficient unit.
HSPF and SEER
It is important to note that the SEER scale does not apply to the performance and efficiency of a heat pump. Usually, the HSPF, or the Heating Seasonal Performance Factor is used. HSPF was also created by the Department of Energy. That said, the HSPF of your heat pump is just as crucial as the SEER rating of your air conditioning system. Generally, it is less expensive to use a heat pump to heat your Arizona home than using a conventional fuel-based heating system. The system will save you money on heating bills in the winter.
Check the AFUE Rating – Consider Fuel Utilization When Making Your Repair or Replace Decision
The AFUE rating is a creation of the American Society of Heating Refrigeration and Air Conditioning Engineers or ASHRAE in short. The AFUE rating of your HVAC system is a key factor of consideration and can determine whether you are losing money or saving money. Currently, ASHRAE restricts manufacturers to producing heating and cooling systems with AFUE ratings over 80%. However, manufacturers of HVAC equipment strive to produce equipment with 96% AFUE and above. So what is the significance of AFUE? Simply put, AFUE is a measure of how well your energy dollars are fully utilized when running your home’s heating system. When you see 95% AFUE, this means that 5 cents is wasted for every dollar spent on heating.
Most manufacturers usually claim that their products are built to last, so why would anyone need a warranty? Well, the reality is that there is no such thing as perfection. Even the best manufacturers make equipment that malfunctions. While you may buy a unit that will run perfectly for several years, someone else may buy a similar make and model and experience a major fault a few weeks after installing the unit. That is why you need to compare the product warranties offered by different HVAC providers. Consider acquiring an extended warranty to ensure you’re completely covered.